Dry ice cleaning accessories 23 24 25 26 28 29 30 31 32 33 34 35 36 37 IB 7/40 Classic IB 7/40 Adv IB 15/120 Order No. Description Mini angled nozzle, 60°, XS 21 4.321-261.0 Miniature angled nozzle for cleaning in tight spaces. Deflects the jet about 60° laterally. Protrudes 57 mm to the Industrial side, length: 260 mm. The set consists of 4 parts: 1 x union nut. 1 x extension, 100 mm (5.321-971.0). 1 x angle piece, 60° (5.321-972.0). 1 x nozzle (5.321-977.0) Any number of extensions can be attached. The angle and nozzle can be ordered separately. Extension, 100 mm 22 5.321-971.0 100 mm extension tube for miniature angled nozzles (60°, 90°, 135°). Angle, 90° 23 5.321-973.0 Angle piece, 90º, for all miniature angled nozzles. Angle, 60° 24 5.321-972.0 Angle piece, 60º, for all miniature angled nozzles. Replacement nozzle 25 5.321-977.0 Nozzle for all miniature angled nozzles. Straight adapter for angled nozzle 26 5.321-992.0 For attachment to all miniature angled nozzles. Converts a miniature angled nozzle to a straight nozzle. Cavity nozzle, XS 27 4.321-989.0 Diameter: 22 mm. Any number of extension pieces can be attached. Nozzle accessories Scrambler 28 4.110-015.0 The innovative Scrambler patented by Kärcher is mounted between the gun and jet nozzle and breaks up the 3 mm dry ice pellets into fine particles. This makes it possible to clean very sensitive surfaces. There are three pellet breaking force levels. Nozzle extension 29 4.130-417.0 170 mm nozzle extension. 30 4.760-658.0 300 mm nozzle extension. Handle 31 6.321-206.0 Handle for use with nozzle extension (4.130-417.0, 170 mm). Handle IB 7/40 32 4.321-248.0 Handle for attachment to nozzle extension (4.760-658.0, 300 mm). For convenient two-hand use. Angled blasting tube 90° 33 4.321-203.0 90° lance for use with all available nozzles. Requires the use of adapter 4.130-425.0. Angled blasting tube 105° 34 4.321-204.0 105° lance for use with all available nozzles. Requires the use of adapter 4.130-425.0. Intermediate piece for angle 35 4.130-425.0 Adapter for all available angled lances. spray pipes Open-end wrench 36 7.815-009.0 Open-end wrench for mounting nozzles (2 required). Grease for nozzle thread 37 6.288-088.0 The threads of the jet nozzles must be regularly treated with this silicone-free grease. (silicone-free) Nozzle lightning for IB 7/40 38 2.815-421.0 Nozzle light screws on to the blasting gun to illuminate the working area. Nozzle lightning for IB 15/120 39 2.815-422.0 Nozzle light screws on to the jet gun to illuminate the spray area. Blasting hose, compressed air hose Blasting hose 40 4.013-043.0 8 m jet hose with electric control cable and quick-action couplings, non-marking outer layer, silicone-free (3/4" diameter). 41 4.013-042.0 5 m jet hose with electric control cable and quick-action couplings, non-marking outer layer, silicone-free (1/2" diameter). Air hose (10 m) 42 6.390-284.0 1 inch. Air hose (20 m) 43 6.390-285.0 Protective foil for IB spray hose, 44 6.667-214.0 100 m roll of hose foil. Protects the jet hose from fouling and damage. If the foil is damaged, 100 m it can easily be replaced. Protective equipment Safety glasses 45 6.321-208.0 Safety goggles. Protective gloves 46 6.321-210.0 Protective gloves. Ear muffs 47 6.321-207.0 Hearing protection. Included in delivery. Available accessories. Further original Kärcher accessories and cleaning agents can be found on the following pages. 370
Catalogue 2013
To see the actual publication please follow the link above